XtraTuff™

Cold Resistant PVC Glove with Detachable Acrylic Liner and Sandy Coating - Insulated & Waterproof

58-8658DL

AJK

EN 374 Results: AJK

A: Methanol
J: Heptane
K: Sodium Hydroxide 40%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

4121

EN 388 2016 Results: 4121X

Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Available Colors:

Blue
  • SIZES: L - XXL
  • Packed: 6 Dozen/Case
  • Country of Origin: China
Product Attributes

Polymer: PVC

PVC: PVC resists diluted aqueous solutions of bases or acids and provides reliable resistance to oils and organic solvents. However, it tends to be less flexible, tacky and susceptibleto snagging.

View All PVC

Grip: Rough

Rough: Rough finishes provide an economical choice of enhancing abrasion and cut protection while providing good protection in wet and dry applications.

View All Rough

Lining: Acrylic

Acrylic:

View All Acrylic
Product Description

Product Description

Ideal for use in cold environments to handle grease, oils, acids, caustics and solvents; also used in warehousing, highway construction and traffic control.

Features

  • Sandy finish provides good grip in wet and slippery conditions
  • Cold-resistant outer shell
  • Seamless knit construction protects hands without sacrificing comfort or dexterity
  • Detachable insulated 7 gauge orange terry cloth liner
  • Foam insulation keeps hands warm and dry
  • Liquid-proof

Related Product Downloads

  • XtraTuff
  • Cold Resistant
  • Sandy Coated Finish
  • Blue PVC
  • 7G Detachable Orange Acrylic Terry Liner
  • Liquid-Proof
  • 12" Length
Standards Met

EN 374 Results: AJK

A: MethanolJ: HeptaneK: Sodium Hydroxide 40%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

EN 388 2016 Results: 4121X

Abrasion: 4 Cut (Coupe Test): 1 Tear: 2 Puncture: 1 Cut (TDM-100 Test): Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Chemical Permeation

Chemical Permeation

The chemical permeation of our product is measured in accordance to European Standard EN 374-3. This measures the resistance of protective gloves against chemicals and microorganisms. Part 3 of the standard determines the level of resistance to permeation by chemicals.

Breakthrough Time (BTT)

The number of minutes from initial contact with a test chemical until it is first detected on the inside of the glove.

Breakthrough Time - Protection Index

Each chemical tested is classified in terms of breakthrough time (performance level 0 to 6).

CAUTION: This information is provided as an aid in determining the general suitability of various products for use with specific chemicals. These recommendations are advisory only and the SUITABILITY OF THE PRODUCT FOR A SPECIFIC APPLICATION OR ENVIRONMENT MUST BE DETERMINED BY THE PURCHASER OR USER OF THE PRODUCT. This information should be used as a guide only.

pin Rep Finder
Compare ()
Clear All Compare
Okay, Got it.
X

ORDER SAMPLE

X

GET FIELD TRIAL