Extended Use Ambidextrous Nitrile Glove with Textured Fish Scale Grip - 6 Mil
67-246
JKTP
J: Heptane
K: Sodium Hydroxide 40%
T: Formaldehyde 37%
P: Hydrogen Peroxide 30%
To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.
ESD is an acronym for electrostatic discharge. This discharge is the rapid transfer of static between two different objects. Although ESD doesn’t typically cause harm to the human body - you might only experience it as a small, surprising shock - it can cause extensive damage to electrical equipment and sensitive instruments. This damage may either be permanent, causing the device to malfunction (known as a catastrophic failure), or it may occur on a smaller scale that would be difficult to detect before the device is sent out for service (known as latent defect).
Test Method: ASTM D6978-05
In accordance with ASTM D6978-05, Personal Protective Equipment can be tested to ensure an effective barrier against Fentanyl. The ASTM D6978-05 Standard Practice for Assessment of Medical Gloves to Permeation by Chemotherapy Drug tests a breakthrough time of typically 240 minutes to determine if the PPE provides an effective barrier.
A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.
Click here for more information about Resistive and Capacitive Touchscreens
Available Colors:
Nitrile: Nitrile provides good resistance to hydrocarbon derivatives. It is tough and resistant to abrasion, snags and perforation. However, nitrile with a smooth finish is not recommendedin oily conditions, and avoid prolonged contact with ketones and aromatic solvents.
Powder Free: Manufactured using a chlorination process that creates a less tacky glove surface facilitating donning and leaving no residual traces on surfaces.
Grippaz™ Technology features a fish scale pattern that provides the unparalleled grip performance. Ergonomically designed to provide traction grip on the outside and on the inside Tough stretch formula nitrile fits more snugly than traditional gloves and offers maximum comfort, multiple use durability and dexterity. Ideal for handling oily/wet parts, paint spraying, automotive service and repair and electroplating objects.
J: HeptaneK: Sodium Hydroxide 40%T: Formaldehyde 37%P: Hydrogen Peroxide 30%
To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.
Test Method: ASTM D6978-05
In accordance with ASTM D6978-05, Personal Protective Equipment can be tested to ensure an effective barrier against Fentanyl. The ASTM D6978-05 Standard Practice for Assessment of Medical Gloves to Permeation by Chemotherapy Drug tests a breakthrough time of typically 240 minutes to determine if the PPE provides an effective barrier.
The chemical permeation of our product is measured in accordance to European Standard EN 374-3. This measures the resistance of protective gloves against chemicals and microorganisms. Part 3 of the standard determines the level of resistance to permeation by chemicals.
The number of minutes from initial contact with a test chemical until it is first detected on the inside of the glove.
Each chemical tested is classified in terms of breakthrough time (performance level 0 to 6).
CAUTION: This information is provided as an aid in determining the general suitability of various products for use with specific chemicals. These recommendations are advisory only and the SUITABILITY OF THE PRODUCT FOR A SPECIFIC APPLICATION OR ENVIRONMENT MUST BE DETERMINED BY THE PURCHASER OR USER OF THE PRODUCT. This information should be used as a guide only.
Chemical Name |
Level |
BTT |
---|---|---|
Formaldehyde, 37% | ![]() | >240 MIN |
Hydrochloric Acid 37% | ![]() | >480 MIN |
Hydrogen peroxide, 30% | ![]() | >60 MIN |
n-Heptane | ![]() | >60 MIN |
Sodium hydroxide, 40% | ![]() | >480 MIN |
Ambi-dex® boasts a comprehensive line, offering a variety of options to fit any task requiring disposable gloves. Whether the task requires gloves to be powdered or powder free, nitrile, latex, vinyl, or a more specialized industry, like janitorial/sanitation or food service, Ambi-dex® has it in the arsenal. Additionally, Ambi-dex® with Grippaz™ technology features a fish scale pattern that provides unparalleled grip performance. Grippaz™ are ergonomically designed to provide traction grip on the outside as well as on the inside of the glove.
View ProductsPrivacy Policy | Contact Us | Full Site
© 2012-2024 Protective Industrial Products, Inc. All rights reserved.
CALL US TODAY: +(86) 21 6317 0303