LOGIN/ SIGN UP Products Brands Industries Resources About Us Value Proposition
PRODUCTS CATEGORY
Arm Protection Cold Stress Controlled Environment Electrical Safety Eye Protection Fall Protection Foot Protection Hand Protection Head Protection Hearing Protection Heat Stress Protective Clothing Respiratory Protection Warning Beacons Workwear
Arm ProtectionCut Resistant Sleeve
Cold StressHeated Apparel
Controlled EnvironmentCE ApronCE Finger CotsCE GlovesCE Supplies
Electrical SafetyArc ClothingInsulating Gloves
Eye ProtectionSafety EyewearSafety GlassesSafety Goggles
Fall ProtectionBody WearLanyards - Energy Absorbing
Foot ProtectionSafety Shoes
Hand ProtectionChemical Resistant GlovesCold Protection GlovesCut Resistant GlovesDisposable GlovesExtended Use Disposable GlovesGeneral Purpose Gloves - CoatedGeneral Purpose Gloves - UncoatedHeat Protection GlovesHigh Performance GlovesLeather Drivers GlovesLeather Palm Gloves
Head ProtectionWinter Caps & Liners
Hearing ProtectionEar MuffsEar Plugs
Heat StressEvaporative CoolingPhase Change CoolingSun Protection
Protective ClothingCold Weather WearDisposable ClothingHi-Vis ApparelHi-Vis Cold GearRainwear
Respiratory ProtectionDisposable MasksReusable Facepieces
Warning BeaconsEflare Beacons
WorkwearWork Apparel
promo-tile

GTEK® Polykor®Protection. Performance. Value

promo-tile

Bouton OpticalHigh-Performance Eyewear

promo-tile

G-Tek® KEV™Cut and Heat Resistance

Assurance®

Unsupported Neoprene/Latex, Flock Lined with Raised Diamond Grip - 28 Mil

52-3670

AKL

EN 374 Results: AKL

A: Methanol
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

4121

EN 388 2016 Results: 4121X

Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Available Colors:

Blue
  • SIZES: S - XXXL
  • Packed: 12 Dozen/Case
  • Country of Origin: Malaysia
Product Attributes

Polymer: Neoprene over Latex

Neoprene over Latex: Double dipped so you get the versatile chemical resistance properties of neoprene and the comfort of latex.

View All Neoprene over Latex

Grip: Raised Diamond

Raised Diamond: Diamond patterns provide added grip on wet or dry surfaces, and are commonly used in food handling and processing applications.

View All Raised Diamond

Lining: Flocked

Flocked: Flock lining provides increased comfort and ease of donning.

View All Flocked
Product Description

Product Description

Ideal for use in the petrochemical industry, janitorial, general maintenance and photo finishing.

Features

  • Neoprene gloves provide superior protection from a wide range of chemicals such as acids, caustics, solvents and oils
  • Double dipped so you get the versatile chemical resistance properties of neoprene and the comfort of latex
  • Straight cuff adds additional length to protect the forearm from liquid run-off
  • Flock lining provides increased comfort and ease of donning
  • Raised Diamond pattern for an enhanced grip
  • Made from component materials that comply with Federal regulations for food contact 21 CFR, 170-199
  • Assurance Unsupported Neoprene/Latex
  • 28 Mil
  • Overall Length 12 In. Blue/Yellow
  • Flock Lined
  • Raised Diamond Grip
  • Straight Cuff
Standards Met

EN 374 Results: AKL

A: MethanolK: Sodium Hydroxide 40%L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

EN 388 2016 Results: 4121X

Abrasion: 4 Cut (Coupe Test): 1 Tear: 2 Puncture: 1 Cut (TDM-100 Test): Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Chemical Permeation

Chemical Permeation

The chemical permeation of our product is measured in accordance to European Standard EN 374-3. This measures the resistance of protective gloves against chemicals and microorganisms. Part 3 of the standard determines the level of resistance to permeation by chemicals.

Breakthrough Time (BTT)

The number of minutes from initial contact with a test chemical until it is first detected on the inside of the glove.

Breakthrough Time - Protection Index

Each chemical tested is classified in terms of breakthrough time (performance level 0 to 6).

CAUTION: This information is provided as an aid in determining the general suitability of various products for use with specific chemicals. These recommendations are advisory only and the SUITABILITY OF THE PRODUCT FOR A SPECIFIC APPLICATION OR ENVIRONMENT MUST BE DETERMINED BY THE PURCHASER OR USER OF THE PRODUCT. This information should be used as a guide only.

Chemical Name

Level

BTT

2-Butoxyethanol25 MIN
2-Ethoxyethyl acetate14 MIN
2-Nitropropane12 MIN
2-Pentanone6 MIN
Acetaldehyde3 MIN
Acetic acid, 99%55 MIN
Acetone9 MIN
Acetonitrile25 MIN
Acrylic acid44 MIN
Ammonium Fluoride, 40%>480 MIN
Ammonium hydroxide30 MIN
Aniline (and homologs)61 MIN
Aqua Regia>480 MIN
Benzaldehyde, 99%19 MIN
Carbon disulfide<3 MIN
Carbon tetrachloride12 MIN
Chromic acid and chromates, 50%15 MIN
Cirtic Acid, 10%>480 MIN
Cyclohexanol146 MIN
Di-sec octyl phthalate>480 MIN
Diacetone alcohol84 MIN
Dibutyl phthalate>480 MIN
Diisobutyl ketone23 MIN
Dimethyl acetamide36 MIN
Dimethylformamide40 MIN
Dioxane18 MIN
Epichlorohydrin15 MIN
Ethyl acetate6 MIN
Ethyl ether<3 MIN
Formic acid250 MIN
Furfural19 MIN
Hexamethyldisilazane38 MIN
Hydrogen chloride, 37%25 MIN
Hydrogen fluoride, 48%>480 MIN
Hydrogen peroxide, 30%>480 MIN
Iso-octane17 MIN
Isobutyl alcohol45 MIN
Isopropyl alcohol44 MIN
Kerosene30 MIN
Lactic acid, 85%>480 MIN
Lauric acid, 36% in ethanol>480 MIN
Maleic acid, saturated>480 MIN
MEK Methyl Ethyl Ketone (2-Butanone)<3 MIN
Methyl alcohol18 MIN
n-Amyl acetate13 MIN
n-Butyl acetate10 MIN
n-Butyl alcohol48 MIN
n-Propyl alcohol58 MIN
Nitric acid, 70%220 MIN
Nitrobenzene10 MIN
Octyl alcohol118 MIN
Oleic Acid>480 MIN
Oxalic acid, 12.5%>480 MIN
Palmitic Acid, Sat>480 MIN
Pentachlorophenol, 36% in Ethanol>480 MIN
Perchloric acid, 60%>480 MIN
Phenol, 90%84 MIN
Phosphoric acid, 85%>480 MIN
Pyridine19 MIN
Sulfuric acid, 47%>480 MIN
Sulfuric acid, 96%180 MIN
Tannic Acid, 65%>480 MIN
Toluene9 MIN

The Assurance brand of products has been developed for chemical resistant applications found in all types of industrial settings and designed with the utmost safety in mind. Chemical resistance test results are available on a wide variety of chemical families found commonly in the workplace. All of these gloves have been tested for durability as well. Assurance hand protection will satisfy your needs or we'll take the product back.

View Products
pin Rep Finder
Compare ()
Clear All Compare
Okay, Got it.
X

ORDER SAMPLE

X

GET FIELD TRIAL