LOGIN/ SIGN UP Products Brands Industries Resources About Us Value Proposition
PRODUCTS CATEGORY
Arm Protection Cold Stress Controlled Environment Electrical Safety Eye Protection Fall Protection Foot Protection Hand Protection Head Protection Hearing Protection Heat Stress Protective Clothing Respiratory Protection Warning Beacons Workwear
Arm ProtectionCut Resistant Sleeve
Cold StressHeated Apparel
Controlled EnvironmentCE ApronCE Finger CotsCE GlovesCE Supplies
Electrical SafetyArc ClothingInsulating Gloves
Eye ProtectionSafety EyewearSafety GlassesSafety Goggles
Fall ProtectionBody WearLanyards - Energy Absorbing
Foot ProtectionSafety Shoes
Hand ProtectionChemical Resistant GlovesCold Protection GlovesCut Resistant GlovesDisposable GlovesExtended Use Disposable GlovesGeneral Purpose Gloves - CoatedGeneral Purpose Gloves - UncoatedHeat Protection GlovesHigh Performance GlovesLeather Drivers GlovesLeather Palm Gloves
Head ProtectionWinter Caps & Liners
Hearing ProtectionEar MuffsEar Plugs
Heat StressEvaporative CoolingPhase Change CoolingSun Protection
Protective ClothingCold Weather WearDisposable ClothingHi-Vis ApparelHi-Vis Cold GearRainwear
Respiratory ProtectionDisposable MasksReusable Facepieces
Warning BeaconsEflare Beacons
WorkwearWork Apparel
promo-tile

GTEK® Polykor®Protection. Performance. Value

promo-tile

Bouton OpticalHigh-Performance Eyewear

promo-tile

G-Tek® KEV™Cut and Heat Resistance

Cut Resistant Gloves - Hand Protection

PIP provides cut rated gloves, seamless cut-resistant gloves and sleeves. Our cut-resistant products are extensively used in the industrial, construction and food processing markets.

SHOWING 1-28 OF 28 ITEMS
1 of 1
FILTERS:
CLEAR ALL
13 Gauge
18 Gauge
21 Gauge
Polyurethane Grip w/ PolyKor Fiber BEST SELLER

G-Tek® PolyKor®

Seamless Knit PolyKor® Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers

16-150

  • ANSI Cut Level: A2
  • Liner Material: PolyKor
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XXS - 3XL
  • Packed: 6 Dozen/Case
ansi-A2
ANSI Cut Level: A2

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X42B

EN 388 2016 Results: 4X42BX

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 4

Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Compare

G-Tek® PolyKor®

Seamless Knit PolyKor® Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers

16-319

  • ANSI Cut Level: A2
  • Liner Material: PolyKor
  • Gauge: 18
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS-2XL
  • Packed: 144 Pair/Case
ansi-A2
ANSI Cut Level: A2

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

3X41B

EN 388 2016 Results: 3X41BX

Abrasion: 3
Cut (Coupe Test): X
Tear: 4
Puncture: 1
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Nitrile Grip with PolyKor Fiber

G-Tek® PolyKor®

Seamless Knit PolyKor® Blended Glove with Double-Dipped Nitrile Coated MicroSurface Grip on Palm & Fingers

16-330

  • ANSI Cut Level: A2
  • Liner Material: PolyKor
  • Gauge: 13
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS-2XL
  • Packed: 6 Dozen/Case
ansi-A2
ANSI Cut Level: A2

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4342B

EN 388 2016 Results: 4342BX

Abrasion: 4
Cut (Coupe Test): 3
Tear: 4
Puncture: 2
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Compare
Nitrile Grip with PolyKor Fiber

G-Tek® PolyKor®

Seamless Knit PolyKor® Blended Glove with Nitrile Coated MicroSurface Grip on Palm & Fingers

16-333

  • ANSI Cut Level: A3
  • Liner Material: PolyKor
  • Gauge: 13
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS-2XL
  • Packed: 6 Dozen/Case
ansi-A3
ANSI Cut Level: A3

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X42C

EN 388 2016 Results: 4X42CX

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Compare
Nitrile Grip with PolyKor Fiber

G-Tek® PolyKor®

Hi-Vis Seamless Knit PolyKor® Blended Glove with Double-Dipped Nitrile Coated MicroSurface Grip on Palm & Fingers

16-340LG

  • ANSI Cut Level: A3
  • Liner Material: PolyKor
  • Gauge: 13
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: S-2XL
  • Packed: 6 Dozen/Case
ansi-A3
ANSI Cut Level: A3

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4544C

EN 388 2016 Results: 4544CX

Abrasion: 4
Cut (Coupe Test): 5
Tear: 4
Puncture: 4
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Compare
Nitrile Foam Grip

G-Tek® Paradox™

Seamless Knit PolyKor® Blended Glove with Nitrile Coated Foam Grip on Palm & Fingers - 21 Gauge - Touchscreen Compatible

16-351

  • ANSI Cut Level: A5
  • Liner Material: HPPE/ PolyKor
  • Gauge: 21
  • Weight: Ultra Lightweight
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Reinforced Thumb Crotch, Touchscreen Compatible
  • Sizes: XXS-2XL
  • Packed: 12 Dozen/Case
ansi-A5
ANSI Cut Level: A5

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

3X42E

EN 388 2016 Results: 3X42E

Abrasion: 3
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): E
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 3

Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Compare
Nitrile Grip with PolyKor Fiber

G-Tek® PolyKor®

Seamless Knit PolyKor® Blended Glove with Nitrile Coated Foam Grip on Palm & Fingers

16-354

  • ANSI Cut Level: A5
  • Liner Material: PolyKor
  • Gauge: 13
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS-XXL
  • Packed: 6 Dozen/Case
ansi-A5
ANSI Cut Level: A5

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X43E

EN 388 2016 Results: 4X43E

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): E
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 4

Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Compare
Neofoam Grip with PolyKor Fiber

G-Tek® PolyKor® X7™

Seamless Knit PolyKor® X7™ Blended Glove with NeoFoam® Coated Palm & Fingers - Touchscreen Compatible

16-368

  • ANSI Cut Level: A3
  • Liner Material: PolyKor X7
  • Gauge: 18
  • Coating: Neofoam
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Reinforced Thumb Crotch, Touchscreen Compatible
  • Sizes: S-XXL
  • Packed: 6 Dozen/Case
ansi-A3
ANSI Cut Level: A3

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X31C

EN 388 2016 Results: 4X31CX

Abrasion: 4
Cut (Coupe Test): X
Tear: 3
Puncture: 1
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 2

Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Electrostatic Properties

EN 16350 European standard defines the test conditions and requirements for electrostatic properties of protective gloves used in ATEX area (Atmosphere Explosive). The vertical resistance must be below 108 Ω.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Compare
Neofoam Grip with PolyKor Fiber

G-Tek® PolyKor® X7™

Seamless Knit PolyKor® X7™ Blended Glove with NeoFoam® Coated Palm & Fingers - Touchscreen Compatible

16-377

  • ANSI Cut Level: A7
  • Liner Material: PolyKor X7
  • Gauge: 18
  • Coating: Neofoam
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Touchscreen Compatible
  • Sizes: S - XXL
  • Packed: 6 Dozen/Case
ansi-A7
ANSI Cut Level: A7

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X42F

EN 388 2016 Results: 4X42FX

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): F
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 3

Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Compare
Neofoam Grip with PolyKor Fiber

G-Tek® PolyKor® X7™

Seamless Knit PolyKor® X7™ Blended Glove with NeoFoam® Coated MicroSurface Grip on Palm & Fingers - Touchscreen Compatible

16-399

  • ANSI Cut Level: A9
  • Liner Material: PolyKor X7
  • Gauge: 13
  • Coating: Neofoam
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Touchscreen Compatible
  • Sizes: S-XXL
  • Packed: 6 Dozen/Case
ansi-A9
ANSI Cut Level: A9

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X43F

EN 388 2016 Results: 4X43FX

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): F
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Compare

G-Tek® PolyKor® Xrystal®

F级13针掌浸NEOFoam®防切割手套

16-399

  • Gauge: 13
  • Weight: Regular Weight
  • Coating Coverage: Palm
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: L-XL
  • Packed: 72 Pair/Case

4X43

EN 388 2016 Results: 4X43X

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): X
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Polyurethane Grip w/ PolyKor Fiber BEST SELLER

G-Tek® Paradox™

Seamless Knit PolyKor® Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers - 21 Gauge - Touchscreen Compatible

16-541

  • ANSI Cut Level: A4
  • Liner Material: PolyKor
  • Gauge: 21
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Reinforced Thumb Crotch, Touchscreen Compatible
  • Sizes: XXS-XXL
  • Packed: 12 Dozen/Case
ansi-A4
ANSI Cut Level: A4

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

3X31D

EN 388 2016 Results: 3X31DX

Abrasion: 3
Cut (Coupe Test): X
Tear: 3
Puncture: 1
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 2

Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Compare
Polyurethane Grip w/ PolyKor Fiber BEST SELLER

G-Tek® PolyKor®

Seamless Knit PolyKor® Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers

16-560

  • ANSI Cut Level: A4
  • Liner Material: PolyKor
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XXS-2XL
  • Packed: 6 Dozen/Case
ansi-A4
ANSI Cut Level: A4

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X43D

EN 388 2016 Results: 4X43DX

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 4

Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Compare
Nitrile Grip with PolyKor Fiber

G-Tek® PolyKor®

Seamless Knit PolyKor® Blended Glove with Nitrile Coated MicroSurface Grip on Palm & Fingers

16-635

  • ANSI Cut Level: A5
  • Liner Material: PolyKor
  • Gauge: 13
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: S-XXL
  • Packed: 6 Dozen/Case
ansi-A5
ANSI Cut Level: A5

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X42E

EN 388 2016 Results: 4X42EX

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): E
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Compare

G-Tek® PolyKor®

E级13针PolyKor®PU防切割手套

16-645LG

  • Liner Material: PolyKor Xrystal
  • Gauge: 13
  • Weight: Standard Weight
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: S-XL
  • Packed: 72 Pair/Case

4X42

EN 388 2016 Results: 4X42X

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): X
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Nitrile Grip with PolyKor Fiber

G-Tek® PolyKor®

Seamless Knit PolyKor® Blended Glove with Double-Dipped Nitrile Coated MicroSurface Grip on Palm & Fingers

16-655

  • ANSI Cut Level: A5
  • Liner Material: PolyKor
  • Gauge: 13
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: S-XXL
  • Packed: 6 Dozen/Case
ansi-A5
ANSI Cut Level: A5

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X42E

EN 388 2016 Results: 4X42EX

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): E
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Compare
Polyurethane Grip w/ PolyKor Fiber

G-Tek® PolyKor®

Seamless Knit PolyKor® Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers

16-665

  • ANSI Cut Level: A5
  • Liner Material: Aramid/ PolyKor
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: S-XXL
  • Packed: 6 Dozen/Case
ansi-A5
ANSI Cut Level: A5

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X42E

EN 388 2016 Results: 4X42EX

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): E
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Compare

PIP®

丁腈光面防切割PolyKor纱线手套

16-756AP

  • Liner Material: PolyKor
  • Gauge: 13
  • Weight: Standard Weight
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: S-XXL
  • Packed: 12 Dozen/Case

4544

EN 388 2016 Results: 4544XX

Abrasion: 4
Cut (Coupe Test): 5
Tear: 4
Puncture: 4
Cut (TDM-100 Test): X
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Polyurethane Grip w/ PolyKor Fiber BEST SELLER

G-Tek® PolyKor®

G-Tek PolyKor, Economy, White 13G Seamless Knit, Gray PU Smooth, Touchscreen Compatible, A2

16-D622

  • ANSI Cut Level: A2
  • Liner Material: PolyKor
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Touchscreen Compatible
  • Sizes: XXS-XXL
  • Packed: 6 Dozen/Case
ansi-A2
ANSI Cut Level: A2

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4342B

EN 388 2016 Results: 4342BX

Abrasion: 4
Cut (Coupe Test): 3
Tear: 4
Puncture: 2
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 3

Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Compare

G-Tek® PolyKor®

C级13针PolyKor®乳胶起皱防切割手套

16-P815

  • Gauge: 13
  • Weight: Standard Weight
  • Coating: Latex
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: L
  • Packed: 72 Pair/Case

3X42

EN 388 2016 Results: 3X42X

Abrasion: 3
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): X
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare

G-Tek® PolyKor®

D级13针PolyKor®乳胶起皱防切割手套

16-P833W

  • Liner Material: PolyKor
  • Gauge: 13
  • Weight: Standard Weight
  • Coating: Latex
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Seamless Knit
  • Sizes: XL-2XL
  • Packed: 100 Pair/Case

4X44

EN 388 2016 Results: 4X44XX

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 4
Cut (TDM-100 Test): X
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 4

Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Compare

G-Tek® PolyKor®

F级13针PolyKor®乳胶磨砂防切割手套

16-P893

  • Gauge: 13
  • Weight: Standard Weight
  • Coating: Latex
  • Coating Coverage: Full Hand
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: L
  • Packed: 144 Pair/Case

4X43

EN 388 2016 Results: 4X43X

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): X
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 3

Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Compare
Polyurethane Grip w/ PolyKor Fiber

G-Tek® VR-X™

Seamless Knit PolyKor® Blended Glove with Polyurethane Advanced Barrier Coating Protection – Touchscreen Compatible

16-VRX380

  • ANSI Cut Level: A3
  • Liner Material: HPPE
  • Gauge: 18
  • Weight: Lightweight
  • Coating: Polyurethane
  • Coating Coverage: Full Hand
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Touchscreen Compatible
  • Sizes: XS-XXL
  • Packed: 6 Dozen/Case
ansi-A3
ANSI Cut Level: A3

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X32C

EN 388 2016 Results: 4X32CX

Abrasion: 4
Cut (Coupe Test): X
Tear: 3
Puncture: 2
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-1
ANSI Abrasion Level: 1

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 3

Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Protective Gloves Against Micro-organisms

The EN ISO 374-5 VIRUS standard measures the ability of gloves to protect users against bacteria, fungi and viruses. Gloves with this marking must pass EN374-2 for leak testing.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Compare
ECO Series CR Sustainable Fiber Gloves BEST SELLER

Great White® ECO Series™

Seamless Knit Dyneema® Diamond 2.0 Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers

19-D322

  • ANSI Cut Level: A4
  • Liner Material: Dyneema Diamond 2.0 Technology
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS-XXXL
  • Packed: 6 Dozen/Case
ansi-A4
ANSI Cut Level: A4

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X42D

EN 388 2016 Results: 4X42DX

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 3

Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Compare

G-Tek® PolyKor® X7™

F级18针PolyKor®X7™无涂层防切割手套

22-C367

  • Liner Material: Engineered Yarn
  • Gauge: 18
  • Weight: Standard Weight
  • Cuff: Knit Wrist
  • Construction: Seamless Knit, Touchscreen Compatible
  • Sizes: M-XL
  • Packed: 144 Pair/Case

4X4X

EN 388 2016 Results: 4X4XX

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: X
Cut (TDM-100 Test): X
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Compare
Polyurethane Grip w/ PolyKor Fiber

G-Tek® PolyKor®

Seamless Knit PolyKor® Blended Glove with Polyurethane Coated Smooth Grip on Palm & Fingers - Touchscreen Compatible

556

  • ANSI Cut Level: A5
  • Liner Material: HPPE
  • Gauge: 18
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Reinforced Thumb Crotch, Touchscreen Compatible
  • Sizes: XS-2XL
  • Packed: 144 Pair/Case
ansi-A5
ANSI Cut Level: A5

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X31E

EN 388 2016 Results: 4X31EX

Abrasion: 4
Cut (Coupe Test): X
Tear: 3
Puncture: 1
Cut (TDM-100 Test): E
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 2

Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Compare
Nitrile Grip with PolyKor Fiber

G-Tek® PolyKor®

Hi-Vis Seamless Knit Polykor Blended Glove with Nitrile Foam Coated Grip on Palm & Fingers

705CGNF

  • ANSI Cut Level: A3
  • Liner Material: PolyKor
  • Gauge: 13
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: S-2XL
  • Packed: 12 Dozen/Case
ansi-A3
ANSI Cut Level: A3

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X43C

EN 388 2016 Results: 4X43CX

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Compare
Uncoated Polykor Fiber

Barracuda®

Seamless Knit HPPE Blended Glove - Medium Weight

713DG

  • ANSI Cut Level: A4
  • Liner Material: HPPE
  • Gauge: 13
  • Weight: Medium Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Sizes: XXS-3XL
  • Packed: 10 Dozen/Case
ansi-A4
ANSI Cut Level: A4

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

3X41D

EN 388 2016 Results: 3X41DX

Abrasion: 3
Cut (Coupe Test): X
Tear: 4
Puncture: 1
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
SHOWING 1-28 OF 28 ITEMS
1 of 1
pin Rep Finder
Compare ()
Clear All Compare
Okay, Got it.
X

ORDER SAMPLE

X

GET FIELD TRIAL