Protect Your Hands

PIP offers the widest range of Seamless Cut-Resistant gloves and sleeves anywhere in the world. Cut-Resistant products are extensively used in industrial, construction and food processing markets. The use of Cut-Resistant gloves and sleeves has increased considerably over the years as we've led with the introductions of new yarns and grips.

SHOWING 1-4 OF 4 ITEMS
1 of 1
FILTERS:
CLEAR ALL
ANSI Puncture Level 3
Nitrile Foam Grip

G-Tek® PolyKor®

Seamless Knit PolyKor® Blended Glove with Nitrile Coated Foam Grip on Palm & Fingers - 21 Gauge - Touchscreen Compatible

16-351

  • ANSI Cut Level: A5
  • Liner Material: HPPE/ PolyKor
  • Gauge: 21
  • Weight: Ultra Lightweight
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Reinforced Thumb Crotch, Touchscreen Compatible
  • Sizes: XXS-2XL
  • Packed: 12 Dozen/Case
ansi-A5
ANSI Cut Level: A5

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

3X42E

EN 388 2016 Results: 3X42E

Abrasion: 3
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): E
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 3

Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Compare
Neofoam Grip with PolyKor Fiber BEST SELLER

G-Tek® PolyKor® X7™

Seamless Knit PolyKor® X7™ Blended Glove with NeoFoam® Coated Palm & Fingers - Touchscreen Compatible

16-377

  • ANSI Cut Level: A7
  • Liner Material: PolyKor X7
  • Gauge: 18
  • Coating: Neofoam
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Touchscreen Compatible
  • Sizes: S - XXL
  • Packed: 6 Dozen/Case
ansi-A7
ANSI Cut Level: A7

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X42F

EN 388 2016 Results: 4X42FX

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): F
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 3

Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Compare
Polyurethane Grip w/ PolyKor Fiber BEST SELLER

G-Tek® VR-X™

Seamless Knit PolyKor® Blended Glove with Polyurethane Advanced Barrier Coating Protection – Touchscreen Compatible

16-VRX380

  • ANSI Cut Level: A3
  • Liner Material: HPPE
  • Gauge: 18
  • Weight: Lightweight
  • Coating: Polyurethane
  • Coating Coverage: Full Hand
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Touchscreen Compatible
  • Sizes: XS-XXL
  • Packed: 6 Dozen/Case
ansi-A3
ANSI Cut Level: A3

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X32C

EN 388 2016 Results: 4X32CX

Abrasion: 4
Cut (Coupe Test): X
Tear: 3
Puncture: 2
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-1
ANSI Abrasion Level: 1

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 3

Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Compare
ECO Series CR Sustainable Fiber Gloves BEST SELLER

Great White® ECO Series™

Seamless Knit Dyneema® Diamond 2.0 Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers

19-D322

  • ANSI Cut Level: A4
  • Liner Material: Dyneema Diamond 2.0 Technology
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS-XXL
  • Packed: 6 Dozen/Case
ansi-A4
ANSI Cut Level: A4

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X42D

EN 388 2016 Results: 4X42DX

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 3

Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Compare
SHOWING 1-4 OF 4 ITEMS
1 of 1
pin Rep Finder
Compare ()
Clear All Compare
Okay, Got it.
X

ORDER SAMPLE

X

GET FIELD TRIAL