Assurance®

Unsupported Latex Canner, Unlined with Raised Diamond Grip -18 Mil

47-L171B

ABK

EN 374 Results: ABK

A: Methanol
B: Acetone
K: Sodium Hydroxide 40%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

1010

EN 388 2016 Results: 1010X

Abrasion: 1
Cut (Coupe Test): 0
Tear: 1
Puncture: 0
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Available Colors:

Blue
  • SIZES: S - XL
  • Packed: 12 Dozen/Case
  • Country of Origin: Sri Lanka
Product Attributes

Polymer: Latex

Latex : Latex provides good resistance to numerous acids and ketones, is flexible and is tear and snag resistant. However, latex should not be used for contact with hydrocarbon basedoils or solvents, and it is possible for some users to have intolerance to the material.

View All Latex

Grip: Raised Diamond

Raised Diamond: Diamond patterns provide added grip on wet or dry surfaces, and are commonly used in food handling and processing applications.

View All Raised Diamond

Lining: Unlined

Unlined: Unlined to reduce potential of product contamination.

View All Unlined
Product Description

Product Description

Ideal for food processing and applications where shedding of flock lining is to be avoided.

Features

  • Unlined to reduce potential of product contamination
  • Straight cuff adds additional length to protect the forearm from liquid run-off
  • Raised Diamond pattern for an enhanced grip
  • Chlorinated to harden and cleanse the surface of the glove
  • Complies with FDA food handling requirements 21 CFR, Part 177
  • ISO 9001: 2008/SLS ISO 9001:2008
  • Silicone Free
  • Assurance Unsupported Latex
  • 18 Mil
  • Overall Length 12 Inches
  • Blue
  • Unlined
  • Diamond Grip
  • Straight Cuff
Standards Met

EN 374 Results: ABK

A: MethanolB: AcetoneK: Sodium Hydroxide 40%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

EN 388 2016 Results: 1010X

Abrasion: 1 Cut (Coupe Test): 0 Tear: 1 Puncture: 0 Cut (TDM-100 Test): Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Chemical Permeation

Chemical Permeation

The chemical permeation of our product is measured in accordance to European Standard EN 374-3. This measures the resistance of protective gloves against chemicals and microorganisms. Part 3 of the standard determines the level of resistance to permeation by chemicals.

Breakthrough Time (BTT)

The number of minutes from initial contact with a test chemical until it is first detected on the inside of the glove.

Breakthrough Time - Protection Index

Each chemical tested is classified in terms of breakthrough time (performance level 0 to 6).

CAUTION: This information is provided as an aid in determining the general suitability of various products for use with specific chemicals. These recommendations are advisory only and the SUITABILITY OF THE PRODUCT FOR A SPECIFIC APPLICATION OR ENVIRONMENT MUST BE DETERMINED BY THE PURCHASER OR USER OF THE PRODUCT. This information should be used as a guide only.

Chemical Name

Level

BTT

Acetic acid, 10%>480 MIN
Acetic acid, 20%>480 MIN
Acetic acid, 25%>480 MIN
Acetic acid, glacial10 MIN
Acetone30 MIN
Ammonium hydroxide, 25%>480 MIN
Cyclohexane10 MIN
Cyclohexanone10 MIN
Ethyl alcohol>480 MIN
Hydrogen chloride, 10%>480 MIN
Isopropyl alcohol>480 MIN
Methyl alcohol15 MIN
n-Propyl alcohol>480 MIN
Nitric acid, 10%>480 MIN
Nitric acid, 40%>480 MIN
Phosphoric acid, 85%>480 MIN
Potassium hydroxide, 50%>480 MIN
Sodium hydroxide, 20%>480 MIN
Sodium hydroxide, 40%176 MIN
Sodium hydroxide, 50%>480 MIN
Sodium hypochlorite>480 MIN
Sodium silicate>480 MIN
Sulfuric acid, 40%>480 MIN
Sulfuric acid, 50%>480 MIN
Sulfuric acid, 96%95 MIN

The Assurance brand of products has been developed for chemical resistant applications found in all types of industrial settings and designed with the utmost safety in mind. Chemical resistance test results are available on a wide variety of chemical families found commonly in the workplace. All of these gloves have been tested for durability as well. Assurance hand protection will satisfy your needs or we'll take the product back.

View Products
pin Rep Finder
Compare ()
Clear All Compare
Okay, Got it.
X

ORDER SAMPLE

X

GET FIELD TRIAL