Global Leader in Hand Protection

As a licensee of both Dyneema® and DuPont® advanced fibers, our gloves and sleeves are made using proprietary engineered yarn blends and coatings. The result - hand and arm protection that is innovative and performance driven. Meeting todays tough ANSI and EN standards, we develop and market seamless knit, coated and uncoated, polymer, supported and unsupported as well as cut and sewn gloves in both leather and advanced composite materials.

SHOWING 1-6 OF 6 ITEMS
1 of 1
FILTERS:
CLEAR ALL
Industrial Safety: Oil & Gas PRODUCTS
Goatskin

PIP®

Goatskin Leather Palm Glove with Leather Back and Kevlar® Blended Liner - Finger Impact Protection

120-4100

  • Hide: Top Grain Goatskin
  • Cuff: Slip-on
  • Construction: Cut-and-Sewn, Reinforced Thumb Crotch
  • Sizes: M-XXXL
  • Packed: 72 Pair/Case
ansi-A4
ANSI Cut Level: A4

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

3X33D

EN 388 2016 Results: 3X33DX

Abrasion: 3
Cut (Coupe Test): X
Tear: 3
Puncture: 3
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3884-09

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 4

Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Polyurethane Grip w/ PolyKor Fiber BEST SELLER

G-Tek® PolyKor®

Seamless Knit PolyKor® Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers - 21 Gauge - Touchscreen Compatible

16-541

  • ANSI Cut Level: A4
  • Liner Material: PolyKor
  • Gauge: 21
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Reinforced Thumb Crotch, Touchscreen Compatible
  • Sizes: XXS-XXL
  • Packed: 12 Dozen/Case
ansi-A4
ANSI Cut Level: A4

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

3X31D

EN 388 2016 Results: 3X31DX

Abrasion: 3
Cut (Coupe Test): X
Tear: 3
Puncture: 1
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 2

Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

G-Tek®

涤纶丁腈发泡手套

34-C232-AP

  • Liner Material: Polyester
  • Gauge: 13
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Grip: Foam
  • Cuff: Elastic
  • Construction: Coated Seamless Knit
  • Sizes: XS-XL
  • Packed: 25 Dozen/Case

3121

EN 388 2016 Results: 3121XX

Abrasion: 3
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 1

Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Multi-Polymer Blends

MaxiChem®

Nitrile Blend Coated Glove with Nylon / Elastane Liner and Non-Slip Grip on Palm & Fingers - 14"

56-635

  • Polymer: Nitrile
  • Lining: Nylon
  • Length: 14""
  • Cuff: Gauntlet
  • Grip: Non-Slip
  • Coating Coverage: Palm, Fingers & Knuckles
  • Construction: Supported
  • Sizes: S-XXL
  • Packed: 6 Dozen/Case

AKL

EN 374 Results: AKL

A: Methanol
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

4121

EN 388 2016 Results: 4121X

Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Specialty PVC Blends on Seamless Liners

XtraTuff™

Oil Resistant PVC Glove with Seamless Liner and Rough Coating - 10"

58-8655

  • Polymer: PVC
  • Lining: String Knit
  • Length: 10""
  • Cuff: Gauntlet
  • Grip: Rough
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Seamless Knit
  • Sizes: S - XL
  • Packed: 6 Dozen/Case

AJKL

EN 374 Results: AJKL

A: Methanol
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

4121

EN 388 2016 Results: 4121X

Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Specialty PVC Blends on Seamless Liners

XtraTuff™

Oil Resistant PVC Glove with Seamless Liner and Rough Coating - 12"

58-8656

  • Polymer: PVC
  • Lining: Interlock
  • Length: 12""
  • Cuff: Straight
  • Grip: Rough
  • Dip: Double
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: S - XXL
  • Packed: 6 Dozen/Case

AJKL

EN 374 Results: AJKL

A: Methanol
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

4121

EN 388 2016 Results: 4121X

Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

SHOWING 1-6 OF 6 ITEMS
1 of 1
pin Rep Finder
Compare ()
Clear All Compare
Okay, Got it.
X

ORDER SAMPLE

X

GET FIELD TRIAL