The Assurance You Need

Our Assurance®, Ambidex® and ProCoat® lines of chemical and liquid resistant gloves have been designed with the utmost safety in mind. Resistance and permeation test results are available for a wide variety of chemical families found commonly in the workplace. While these results are generated in a laboratory setting and we are highly confident of the ability to perform well at work, we recommend that you should also conduct your own testing to make certain that the gloves are compatible with your application.

SHOWING 1-5 OF 5 ITEMS
1 of 1
FILTERS:
CLEAR ALL
Country of Origin: China

Assurance®

Unsupported Nitrile, Flock Lined with Raised Diamond Grip - 15 Mil

50-AS25GC

  • Polymer: Nitrile
  • Thickness: 15"
  • Lining: Flocked
  • Cuff: Straight
  • Grip: Raised Diamond
  • Construction: Unsupported
  • Sizes: M-2XL
  • Packed: 144 Pair/Case

3101

EN 388 2016 Results: 3101XX

Abrasion: 3
Cut (Coupe Test): 1
Tear: 0
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Specialty PVC Blends on Seamless Liners

XtraTuff™

Oil Resistant PVC Glove with Seamless Liner and Rough Coating - 10"

58-8655

  • Polymer: PVC
  • Lining: String Knit
  • Length: 10""
  • Cuff: Gauntlet
  • Grip: Rough
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Seamless Knit
  • Sizes: S - XL
  • Packed: 6 Dozen/Case

AJKL

EN 374 Results: AJKL

A: Methanol
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

4121

EN 388 2016 Results: 4121X

Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare

XtraTuff™

Oil Resistant PVC Glove with Seamless Liner and Rough Coating - 10"

58-8655AP

  • Polymer: PVC
  • Sizes: S﹣XXL
  • Packed: 72 Pair/Case
Compare
Specialty PVC Blends on Seamless Liners

XtraTuff™

Oil Resistant PVC Glove with Seamless Liner and Rough Coating - 12"

58-8656

  • Polymer: PVC
  • Lining: Interlock
  • Length: 12""
  • Cuff: Straight
  • Grip: Rough
  • Dip: Double
  • Coating Coverage: Full Hand
  • Liner Material: Cotton
  • Construction: Supported
  • Sizes: S - XXL
  • Packed: 6 Dozen/Case

AJKL

EN 374 Results: AJKL

A: Methanol
J: Heptane
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

4121

EN 388 2016 Results: 4121X

Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
Specialty PVC Blends on Seamless Liners

XtraTuff™

Cold Resistant PVC Glove with Detachable Acrylic Liner and Sandy Coating - Insulated & Waterproof

58-8658DL

  • Polymer: PVC
  • Lining: Acrylic
  • Length: 12""
  • Cuff: Straight
  • Grip: Rough
  • Coating Coverage: Full Hand
  • Liner Material: Interlock/ Terry Cloth
  • Construction: Seamless Knit, Supported
  • Sizes: L - XXL
  • Packed: 6 Dozen/Case

AJK

EN 374 Results: AJK

A: Methanol
J: Heptane
K: Sodium Hydroxide 40%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

4121

EN 388 2016 Results: 4121X

Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Compare
SHOWING 1-5 OF 5 ITEMS
1 of 1
pin Rep Finder
Compare ()
Clear All Compare
Okay, Got it.
X

ORDER SAMPLE

X

GET FIELD TRIAL